
Window Replacement in Frisco, Documented in Photos
We replace worn, drafty and fogged windows across Frisco, Plano and Prosper, and we install entry doors, patio doors and storm doors. Before we quote, you see photos of what we found: failed glass seals, soft sills, gaps behind the trim. After install, you see how the new unit was flashed and sealed, layer by layer.
- Photos at every step
- Free in-person consultations
- $0 Down on the whole project
- Written line-item quotes
How a Project Runs
From the first call to the final walkthrough, you can see what was done inside the wall at each stage.
- 1
Call for a free consultation
Tell us which windows or doors are giving you trouble and we'll set a time to come out. The consultation is free and happens at your home.
- 2
Measure and inspect
We measure each opening in three places, check it for square and document the frame, sill and exterior seal. You'll see failed seals, rot or gaps before we talk options.
- 3
Written quote
You get a line-by-line quote naming the units, glass and install method for each opening. Custom units are then ordered to the measurements we took.
- 4
Install day
We lay drop cloths, remove the old unit, set a sloped sill pan, then shim, level and insulate the new one. Flashing tape and sealant go on before the trim, and we photograph each layer before it's covered.
- 5
Walkthrough and handoff
We open and lock every sash and door with you, haul away the old units and hand over the full set of install pictures for your records.
Windows and Doors We Install
Our work covers window replacement, entry doors, patio doors and storm doors. Our team has over 10 years of experience setting units into real openings, including ones that have shifted out of square. We are fully insured, and our installers are Lead certified, which matters when an older frame may carry lead paint. On each service page you'll find which components wear out first and the install method we use for that type of opening.

Window Replacement
New vinyl or fiberglass windows sized to each opening and sealed with proper flashing, with a before-and-after record of every opening.

Entry Doors
Steel, fiberglass and wood front doors installed as complete prehung units, with a sill pan, a square frame and hardware that latches cleanly.
Patio Doors
Replacement sliders and French doors set on a sloped sill pan with lapped flashing, with the opening shown to you before it gets covered.
Storm Doors
Full-view, mid-view and retractable-screen storm doors, measured to your opening and installed with a sealed frame, a sweep and a properly set closer.
What Shapes the Cost of Your Windows and Doors
Two houses with an equal count of windows can end up with very different prices. The total comes from the options you pick and from what turns up once the old unit is removed. These are the things we weigh when putting your quote together.
We write each quote only after seeing your home in person, and every opening is priced on a separate line. Starting costs nothing up front with $0 Down on the whole project, and if smaller payments would help, we can explain our 0% Financing options.
- How big and how many
- Big units and special shapes such as arches or tall picture windows cost more to make and take more people to install. Handling several openings in one job tends to spread the setup time.
- What the frame is made of
- Vinyl, fiberglass and composite frames vary in price, rigidity and how much they grow in the heat. With long hot summers, a more rigid frame keeps its seal longer on walls that face west.
- The glass you choose
- Two panes or three, low-E coatings and argon fill each move the price. Rather than upgrading every opening automatically, we fit the glass to how much sun each wall gets.
- Insert versus full-frame
- An insert sets the new unit inside the existing frame, which only works if that frame is sound, dry and square. Full-frame work takes the opening down to the studs. It costs more, but we can swap out rotted wood and redo the flashing.
- What is hiding behind the trim
- A water-damaged sill or a sagging header means extra carpentry. We record it during the consultation so it shows up in the quote instead of on install day.
- Reach and finishing
- Upstairs openings, brick returns and new interior trim each add labor.

About Window Replacement Frisco
We install replacement windows and new doors for homeowners in Frisco and the communities around it. Taking pictures at every stage became our habit because so many people we met had no record of what an earlier installer left behind the trim.
The opening matters as much as the unit we set into it. Ground movement in North Texas clay can rack a frame out of square, and a small gap at one corner lets water run down into the sill. We check for that, show it to you and correct it during the install, so the new unit doesn't inherit the old problem.
- In business
- Team has over 10 years of experience
- Insurance
- Fully insured
- Certifications
- Lead certified

Why Homeowners Choose Us
Most replacement jobs hide their problems behind trim and caulk. We open things up, record what is there and show you before any decision gets made.
- You see what we see
- During the consultation we photograph the existing frame, sill, weep holes and exterior seal. If a sill is soft or water has tracked behind the brick mold, you get the picture, not just our word. The same record covers the finished install: shims, foam, flashing tape and the final caulk line.
- An installing team with real hours
- Our team has over 10 years of experience with window and door installs. That time shows in the details that decide how long a unit lasts, like sloping the sill pan so water drains out instead of in.
- Lead certified for older frames
- Our crew is Lead certified, so if your home has painted trim or sashes old enough to contain lead, we follow containment and cleanup practices built for it. Most newer homes won't need this, and we'll tell you plainly when yours doesn't.
- Covered while we work
- We are fully insured. If something gets damaged while we work at your home, you are not left to sort it out alone.
- Quotes that list the parts
- Your written quote names the unit, the glass package, the install method and any trim or sill work. Nothing shows up later as a surprise line item.
Where We Work
We install windows and doors throughout Frisco and nearby communities including Prosper, Plano, McKinney, Allen, Little Elm and The Colony. We also serve homeowners in Hackberry, Providence Village, Paloma Creek South and Savannah. Consultations happen at your home, so we come to you.
- Frisco
- Prosper
- Hackberry
- Plano
- McKinney
- Allen
- Little Elm
- The Colony
- Providence Village
- Paloma Creek South
- Savannah
If you're close to these towns and not sure we cover your street, ask when you call and we'll tell you.

Questions We Get From Frisco Homeowners
How do I know my windows are ready to be replaced?
Fog or moisture sitting between the two panes tells you the insulated glass seal has failed and its gas fill is gone. Sashes that stick, air coming in at the corners and a sill that feels spongy are other warning signs. We take pictures of all of them at the consultation, so you can judge the condition with your own eyes before you choose anything.
Must every window in the house be replaced at once?
No. Seals and sills age unevenly, and the sides of the house that catch strong afternoon sun usually fail first. We can quote the worst openings now and leave the rest for later, though doing them together cuts down on repeated setup. Every opening has its own line on the quote, so the choice stays with you.
Can I spread the cost out?
Yes. You can start with nothing paid up front, because we offer $0 Down on the whole project. What's left can be paid through one of our 0% Financing options. During the free consultation we lay the terms next to your quote so you can compare them directly.
How long will installation take?
After the crew sets up, one window typically takes an hour or two, so most homes with several openings are finished in a day or two. Doors and full-frame jobs take longer since they call for carpentry and flashing work. The expected timeline is written into your quote.
Will the work leave a mess inside my home?
We cover the floors and furniture around each opening, cut out and carry off old material carefully, and vacuum before we go. The old units and all debris go with us. Our last set of photos shows how each opening looked when the job was done.
Which glass stands up best to our summers?
On walls that take the afternoon sun, a low-E coating that blocks solar heat does most of the work, helped by argon between the panes. North-facing walls may not need the same package. We recommend glass for each wall rather than one choice for the entire house.
Does a warranty cover the work?
Yes. Your windows and doors come with a limited lifetime warranty on both product and labor, and it transfers to the buyer if you sell your home. Store the install photos we give you alongside it as a record.
Do I need a permit for my project?
That comes down to what the job involves and what your city requires, so some replacements call for one and some don't. When a permit is required, we file for it and schedule any inspection as part of the job.
See What's Behind Your Old Windows
We'll come to your home, document every opening and give you a written quote you can compare line by line.